How to Choose a Mat for Your Art Print

A mat, also called a matboard or passe-partout, creates a border between your art print and its frame. A slim frame often looks good with a little more space around the artwork. A wide frame already adds visual weight, so a narrower mat can keep the print at the center of attention.

If you’re framing an 11 × 14-inch print, for example, try a 2-inch mat border with a slim frame or a 1½-inch border with a wide frame. The table below gives you a starting point for every print size, from small shelf pieces to oversized wall art.

Art print mat size chart

All dimensions are in inches. The recommendations assume an even border on all four sides. Use them as a starting point when choosing a mat or talking to a framer.

Print size Mat border with a slim frame Mat border with a wide frame
5 × 7 1½″ 1″
8 × 10 2″ 1½″
8 × 12 2″ 1½″
9 × 12 2″ 1½″
11 × 14 2″ 1½″
12 × 16 2½″ 2″
12 × 18 2½″ 2″
16 × 20 2½″ 2″
16 × 24 2½″ 2″
18 × 24 3″ 2″
20 × 28 3″ 2½″
20 × 30 3″ 2½″
24 × 30 3″ 2½″
24 × 32 3″ 2½″
24 × 36 3″ 2½″
28 × 40 3½″ 3″
30 × 40 3½″ 3″
32 × 48 3½″ 3″
40 × 55 4″ 3″
40 × 60 4″ 3″
A2 · 420 × 594 mm 2½″ 2″
A1 · 594 × 841 mm 3″ 2½″

The same border widths work for portrait and landscape prints. For A-series prints, give your framer the exact dimensions in millimeters when ordering the mat opening.

If you already have a frame

Use the frame’s listed size, which is the size of the glazing, mat, or artwork it holds. The outside dimensions include the frame itself and are useful when measuring wall space.

For a centered print, subtract the print width from the listed frame width and divide by two. Repeat with the heights. This gives you the approximate border on each side before allowing for the small overlap at the opening.

Print size Listed frame size Approximate mat borders
5 × 7 8 × 10 1½″ on all sides
8 × 10 11 × 14 1½″ left and right, 2″ top and bottom
11 × 14 16 × 20 2½″ left and right, 3″ top and bottom
18 × 24 24 × 30 3″ on all sides
24 × 36 30 × 40 3″ left and right, 2″ top and bottom

These examples show the prints in portrait orientation. Slightly different borders can look intentional. If you want an even border, choose a frame that adds the same amount to both print dimensions.

If you’re ordering a custom mat

Give your framer two measurements:

  • Outer mat size — the dimensions the mat must fit inside the frame.
  • Mat opening — the cutout that shows the artwork. An opening about ¼ inch smaller than the print in each dimension gives roughly ⅛ inch of overlap on each edge. For an 11 × 14-inch print, that would be an opening of about 10¾ × 13¾ inches.

If the print has a signature or detail close to the edge, show it to the framer before the mat is cut. On a large print, check the finished outside dimensions too, especially if the frame needs to fit between windows, above a mantel, or alongside other artwork.

Ready to choose a print? Start with the size that fits your space, then pick a mat and frame that give the artwork room to breathe. Browse ArtVisionsOlga prints